Home > Fuser Error > 50.0 Fuser Error Hp Laserjet P1102

50.0 Fuser Error Hp Laserjet P1102

Contents

Chan50.0 is an error related to fuser Assembly. If the error persists, replace the main motor. Turn the printer off and then on. 3. Solution: 1. have a peek here

Replace the laser/scanner. 5. If you are are getting a "50 fuser error" and have tried everything else, replace the low-voltage power supply. Replace the low voltage power supply HP COLOR LASER PRINTER 4500 1. Verify that the correct model of fuser is installed. 4. http://www.printertechs.com/printer-troubleshooting/hp-error-codes/195-numeric-error-codes-50-59-hp-laserjet

50.0 Fuser Error Hp Laserjet P1102

Turn the printer off, and then turn the printer on. 2. Chan50.0 is an error related to fuser Assembly. If after replacing the heating element, the error persists, replace the ECU. Make sure that you put the correct model fuser in the right printer.

Hope this will also help others. I have two HP Laserjet 5Ns, one to use and one for parts. Replace the fuser ass'y4. 50 Fuser Error Hp Laserjet 3050 Register a free account to unlock additional features at BleepingComputer.com Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers.

Although I am an HP employee, I am speaking for myself and not for HP. Hp Laser Printer Error Codes Search the Community Entire ForumThis CategoryThis BoardUsers turn on suggested results Auto-suggest helps you quickly narrow down your search results by suggesting I have a good repair guy who can fix it, but I'm trying to go DYI to save a few bucks and learn something in the process. There are typically two sensing elements, a thermal fuse to prevent catastrophic overheating, and a thermistor to provide feedback to the heating circuit and indicate when to turn the heating current

Replace the fan. 50 Fuser Error Hp Laserjet 3055 I do a lot of printing (I'm a writer and an English professor), but don't need anything fancy or color or high res or anything, just reliable and a ton of Check the connector (J1901) between the fuser and the product. Replace the fuser power supply unit.

Hp Laser Printer Error Codes

Power supply is the most common cause. (RG5-4357) Pull the fuser out and check the thermal fuse on top of the fuser and the lamps inside the unit for continuity to How Does a computer get Infected? 50.0 Fuser Error Hp Laserjet P1102 Works great and certainly solved the problem (as I expected it would). -Alan A. 50.0 Fuser Error Hp Laserjet P1108 Check the pressure roller and gears for signs of wear.

The page containing the error will automatically be reprinted. 2. navigate here If the printer is already plugged into a wall outlet, try another power source in the building that is independent of the one currently being used. 4. That's it. Fortune Cookie says: Fortune not Found: Abort, Retry, Ignore? 50.0 Fuser Error Hp Laserjet P1007

If there is not continuity between the fuser connectors neutral and hot with the fuser removed, replace the fuser. Unplug the printer, and then plug it in again.2. Turn Printer off and then turn back on..  2. Check This Out Turn printer off then wait 20 or 30 minutes the turn back on 2.

But I need to now where the power supply is. 50.0 Fuser Error P1108 Fuser Error Code 50.1: Low fuser temperature 50.2: Fuser warm-up service 50.3: High fuser temperature 50.4: Faulty fuser 50.5: Inconsistent fuser (verify voltage model) Service Manual Recommended Action Turn the printer http://www.bleepingcomputer.com/forums/t/2520/how-did-i-get-infected/Forum Rules, The BC Welcome Guide 167 @ June 2015 Back to top #5 EducatedGuess EducatedGuess Topic Starter Members 182 posts OFFLINE Local time:05:46 PM Posted 27 January 2013 -

controller PCB.

A fuser error has occurred. 1: low fuser temperature 2: fuser warm up service 3: fuser over-temperature 4: faulty fuser 5: incorrect fuser is installed 6: open fuser circuit 7. OnSite HP Printer Repair Promotional Coupon Printer Repair Southern California Post navigation ← Previous Next → Fuser Error 50.xx HP Laserjet 4200, 4240, 4250, 4300, 4350, 4345MFP Posted on November 29, Plug the printer into a wall outlet and see if this resolves the problem. 3. 50.0 Fuser Error Hp Laserjet M1005 X description: 1 = Scanner startup error 2 = Scanner rotation error 1.

If so, could someone send me the link? Carefully release the retaining tabs on the plastic panel to the left of the metal back cover by gently pulling the cover to the left while moving both pieces away from How Does a computer get Infected? this contact form Power subsystempage 473................................................................................................................................................................

Reconnect the connectors of the fuser control PCA (J302, J303, J305) and the DC controller PCA (J107). 3. Verify that the correct voltage fuser is installed. 5. Replace the fuser.HP LASER PRINTER 3027M/3035 ERROR 50.X FUSER 1. Verify that the connection to connector J82 on the DC controller PCA is firmly seated. 6.

Defective ac power supply. Replace the fuser power supply unit. Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site. Call for Assistance 877-755-5300 Home About Us Contact Us Search Site Map Printers Supplies Accessories Parts Error Codes Login Shopping Cart Return Policy Privacy Policy Orion Printers and Parts 6030 Marshalee

Check the fan’s connector and make sure the fan is not blocked. 2. Reply 0 0 « Message Listing « Previous Topic Next Topic » Related Documents HP Printers - Using HP Diagnostic Tools for HP Printers in WindowsHP Printers - After Windows 10 Press GO. Try the DIMM in another slot. (The firmware DIMM must remain in slot #4—the lowest DIMM slot.) 3.

If the message persists, reseat the fuser. I swapped the Fuser from the other printer, and still got the error message. Check the cabling connections to the heating element.4. Verify that the fusing assembly is firmly seated in the product chassis.

A fuser error has occurred.